Deep learning-based symbol detection algorithm in IMDD-OOFDM system

In the current research on intensity-modulation and direct-detection optical orthogonal frequency division multiplexing ( IMDD-OOFDM ) system, effective channel compensation is a key factor to improve system performance. In order to improve the efficiency of channel compensation, a deep learning-based symbol detection algorithm is proposed in this paper for IMDD-OOFDM system. Firstly, a high-speed data streams symbol synchronization algorithm based on a training sequence is used to ensure accurate symbol synchronization. Then the traditional channel estimation and channel compensation are replaced by an echo state network (ESN) to restore the transmitted signal. Finally, we collect the data from the system experiment and calculate the signal-to-noise ratio (SNR). The analysis of the SNR optimized by the ESN proves that the ESN-based symbol detection algorithm is effective in compensating nonlinear distortion.     

Self-healing,elastic and deformable novel composite phase change polymer based on thermoplastic elastomer SEBS for wearable devices

Journal of Materials Science - Form-stable composite phase change materials (C-PCMs) prepared by microencapsulation method and porous matrix adsorption method need for compression molding after...     

Enhanced thermal conductivity and stability of boron nitride/phenyl silicone rubber composites via surface modification and grain alignment

Journal of Materials Science - With the extensive use of high-power electronic appliances, polymer-based thermal insulation composites with excellent thermal properties are utilized in the field of...     

Self-healing and wearable conductive hydrogels with dynamic physically crosslinked structure

Traditional hydrogels are easily frozen or evaporated under colder or hotter temperatures, resulting in their performance degradation. In this paper, polyacrylic acid, sodium alginate, carbon nanotubes, water, and glycerol are used to synthesize self-healing, wearable, freezing resistance, and dry resistance conductive hydrogels with interpenetrating crosslinking network structure. The dynamic cross-linking network structure of the hydrogel can rapidly recover and restructure after damage. In addition, the conductive hydrogels exhibit excellent adhesion to various materials (including PTFE, iron, glass, plastic, and skin). Conductive hydrogel has excellent strain-electric sensing properties, and has high sensitivity, significant stability and repeatability. The conductive hydrogel can be used to test the movement of fingers and knee joints by strain sensing, and has excellent, sensitive, and stable resistance response. Therefore, the conductive hydrogel can be used as a wearable strain sensor for real-time detection of human joint movement. The hydrogel has better environmental adaptability and broad application prospects.

     

Hydrogeochemical Processes and Inverse Modeling for a Multilayer Aquifer System in the Yuaner Coal Mine,Huaibei Coalfield,China

Coal mining can dramatically change hydrogeological conditions and induce serious environmental problems. Fifty groundwater samples were collected from the main aquifers in the Yuaner coal mine (Anhui Province, China). The results show that the main hydrogeochemical processes in the mine include dissolution, precipitation, pyrite oxidation, desulfurization, and cation exchange. The Neogene porous aquifer is affected by groundwater flow conditions; its main hydrogeochemical processes are dissolution of carbonate minerals and gypsum, and cation exchange. The Permian coal measure’s fractured sandstone aquifer was confirmed to be controlled by the region’s geological structure; its main hydrogeochemical processes are desulfurization and cation exchange. The Carboniferous Taiyuan limestone aquifer was determined by both groundwater flow conditions and regional geological structure; its main hydrogeochemical processes are dissolution of carbonate minerals and gypsum, pyrite oxidation, and cation exchange. Additionally, hydrogeochemical inverse modeling of the groundwater flow path confirm the hydrochemistry results and principal component analysis.

     

Characteristic tryptic peptides and gelling properties of porcine skin gelatin affected by thermal action

Thermal action in extraction process had effects on characteristic tryptic peptides identification and gelling properties of porcine gelatin. SDS-PAGE, HPLC-LTQ/Orbitrap high-resolution mass spectrometry, texture analyser and rheometer were used to evaluate collagen depolymerisation degree, characteristic tryptic peptides and gelling properties of gelatins prepared in various thermal actions. Results showed that with increasing temperature and time, depolymerisation degree enlarged, while gel strength, gelling and melting temperature decreased. Mass spectra showed that 47 and 49 common characteristic tryptic peptides were identified in gelatins extracted at 50 °C and 100 °C with various times, respectively. Moreover, 34 common characteristic tryptic peptides were identified in all gelatin samples. Further comparison between this work and our previous investigations yielded 20 common characteristic tryptic peptides, which stably exist in various thermal actions. These common characteristic tryptic peptides may be very helpful for the accurate authentication of porcine gelatin.     

Effects of high hydrostatic pressure on the structure and retrogradation inhibition of oat starch

As a non-thermal processing technology, high hydrostatic pressure (HHP) can be used for starch modification without affecting the quality and flavour constituents. The effect of HHP on starch is closely related to the treatment pressure of HHP. In this paper, we investigated the impacts of HHP treatment pressure (0, 100, 200, 300, 400, 500, 600 MPa) on the microstructure and retrogradation characteristics of oat starch, established the retrogradation kinetic model and elaborated the mechanism of HHP treatment inhibiting the retrogradation of oat starch. Results show that HHP treatment caused the microstructure of oat starch experienced crystallisation perfection (100–300 MPa), crystallisation destruction (400 MPa), crystallisation disintegration and gelatinisation (500–600 MPa). Results of oat starch retrogradation showed that, after treated at 500 MPa for 15 min, the recrystallisation rate of oat starch was reduced, the formation of nuclei at the early stage of oat starch retrogradation suppressed and its nucleation mode was changed from instantaneous to spontaneous, otherwise, the mobility of water in oat starch gel system reduced. Therefore, 500 MPa treated for 15 min can inhibits the retrogradation of oat starch. This study provides theoretical guidance for the application of HHP technology in starch modification and food processing.     

Lactobacillus plantarum ZLC-18 fermentation improve tyrosinase inhibition activity and antioxidant capacity in soybean hulls

Soybean hulls, the main byproduct in soybean processing, have many biological activities. However, the value of this byproduct is still far from being fully exploited. In this study, we investigated the anti-tyrosinase and antioxidant capacities in soybean hulls fermented by Lactobacillus plantarum ZLC-18 (L. plantarum ZLC-18). We found that L. plantarum ZLC-18 fermentation could markedly improve the anti-tyrosinase and antioxidant activities of soybean hulls. The anti-tyrosinase and antioxidant activities were positively correlated with the total phenolic and flavonoid contents. UPLC–MS analysis suggested that phenolic compounds (daidzin, genistin, vanillic acid and so on) were increased in soybean hulls after fermentation, and some of these compounds were shown to have anti-tyrosinase and antioxidant activities. Our study demonstrates that fermentation is an efficient strategy to enhance the bioactive function of soybean hulls. Moreover, this study provides evidence that soybean hulls can be used as a kind of functional food ingredient, thereby improving their economic benefits.     

Mechanism in chlorine-enhanced Pd catalyst for H2O2 in situ synthesis in electro-Fenton system

Palladium-based catalysts have been widely employed in the electro-Fenton process for in situ generation of H₂O₂. However, the process is still far from being practical on a large scale. In this work, a series of Cl_xFePd/γ-Al₂O₃/Al catalysts were prepared by a three-step-impregnation method. They exhibited excellent activity in H₂O₂ in situ synthesis and high efficiency in phenol degradation. The characterization results showed that Cl could assist in increasing the content of Pd⁰ and reducing the isoelectric point of catalysts, which led to the drastic promotion in the synthesis of H₂O₂. Theoretical calculations further demonstrated that Cl doping could facilitate the main reaction in H₂O₂ synthesis, as well as inhibit side reactions such as dissociation of the O O bond. Furthermore, kinetic models were proposed and fitted. A plausible reaction mechanism as well as degradation pathways were elaborated based on electron spin resonance and gas chromatography–mass spectrometry results. These findings illustrate the value of palladium-based Cl_xFePd/γ-Al₂O₃/Al catalysts for their application in the electro-Fenton process.